Di-Modell Softina Uhrenarmband aus Kalbsleder mit Ton-in-Ton-Naht
Measure
To find the right watch strap, it's important to know the measurements. Always measure the lug width on the inside.
Wide push clock
The lug width of the watch is measured on the inside of the case. In the illustration, it is 20 mm.
length
The length of the watch strap is calculated from the combined length of the two pieces. The clasp is not included in the measurement. The appropriate length is determined based on your wrist circumference. Please note that the watch itself also contributes to the total length of your wrist circumference.
The lengths are given on the page as follows (lengths without clock):
- XS: ca. 55 x 90 mm
- S: ca. 65 x 110 mm
- M: ca. 82 x 120 mm
- L: ca. 90 x 130 mm
The length may vary slightly depending on the manufacturer.
Wide clasp
The width of the clasp is measured on the inside. Watch straps often taper from the watch to the clasp. This means that the width of the clasp is narrower than the lug width. This is important to consider if you want to continue using the clasp of your old watch strap or if you want a folding clasp. In the illustration, the clasp width is 18 mm.
Band thickness
The thickness of the watch strap, also called the strap thickness, is the distance from the inner lining to the upper leather. The heavier the watch, the more sensible it is to choose a thicker strap. The thickness often tapers towards the tip. In the illustration, the strap thickness is 3 mm.
Measure
To find the right watch strap, it's important to know the measurements. Always measure the lug width on the inside.
Wide push clock
The lug width of the watch is measured on the inside of the case. In the illustration, it is 20 mm.
length
The length of the watch strap is calculated from the combined length of the two pieces. The clasp is not included in the measurement. The appropriate length is determined based on your wrist circumference. Please note that the watch itself also contributes to the total length of your wrist circumference.
The lengths are given on the page as follows (lengths without clock):
- XS: ca. 55 x 90 mm
- S: ca. 65 x 110 mm
- M: ca. 82 x 120 mm
- L: ca. 90 x 130 mm
The length may vary slightly depending on the manufacturer.
Wide clasp
The width of the clasp is measured on the inside. Watch straps often taper from the watch to the clasp. This means that the width of the clasp is narrower than the lug width. This is important to consider if you want to continue using the clasp of your old watch strap or if you want a folding clasp. In the illustration, the clasp width is 18 mm.
Band thickness
The thickness of the watch strap, also called the strap thickness, is the distance from the inner lining to the upper leather. The heavier the watch, the more sensible it is to choose a thicker strap. The thickness often tapers towards the tip. In the illustration, the strap thickness is 3 mm.
Softina im Detail
Die Softina von Di-Modell ist ein Uhrenarmband aus Kalbsleder mit Samtgriff, gefertigt in Tauberbischofsheim. Das Leder ist weich, die Oberfläche matt und leicht strukturiert. Die Naht ist Ton in Ton zur Lederfarbe gehalten. Deshalb wirkt das Band ruhig und lenkt nicht vom Zifferblatt ab.
Mit Anstossbreiten von 9 bis 24 mm passt die Softina an schmale Damenuhren genauso wie an klassische Herrenuhren. Auch ungerade Breiten wie 13, 17, 19 und 21 mm sind erhältlich.
Auf einen Blick
| Hersteller | Di-Modell GmbH & Co. KG |
| Herkunft | Made in Germany, gefertigt in Tauberbischofsheim |
| Material | Kalbsleder mit Samtgriff |
| Oberfläche | matt, leicht strukturiert |
| Naht | handvernäht, Ton in Ton |
| Bandstärke | ca. 2,8 mm |
| Anstossbreite | 9 bis 24 mm, je nach Länge |
| Verlauf | läuft zur Schliesse hin schmaler zu, z. B. 20 auf 18 mm |
| Farben | Schwarz, Dunkelbraun, Rotbraun, Dunkelblau, Weiss |
| Schliesse | Edelstahl, poliert (stahlweiss) oder vergoldet (stahlgold) |
| Lieferumfang | Federstege gratis, Montagewerkzeug gratis bei der Erstbestellung |
Längen und Anstobbreiten
| Gröbe | Länge ohne Uhr | Erhältliche Anstobbreiten |
|---|---|---|
| XS | ca. 55 x 90 mm | 12, 13, 14, 16 und 18 mm |
| S | ca. 65 x 110 mm | 9 bis 16, 18, 20 und 22 mm |
| M | ca. 82 x 120 mm | 10, 12, 14, 16 bis 22 und 24 mm |
| L | ca. 90 x 130 mm | 16, 18, 20, 22 und 24 mm |
Gemessen wird ohne Uhr und ohne Schliebe, je nach Hersteller kann die Länge leicht abweichen. Wie Sie Anstobbreite und Länge richtig messen, zeigt unser Mab-Guide.
Schliebe passend zur Uhr wählen
Die polierte Schliebe (stahlweiss) passt zu Uhren mit Stahlgehäuse, die vergoldete Schliebe (stahlgold) zu goldfarbenen Gehäusen.
Hersteller und Service
Hersteller
Service
Beratung zur passenden Grösse
- Kostenloser Versand innerhalb Deutschlands, Lieferzeit 3 bis 5 Tage
- 14 Tage Widerrufsrecht
- Federstege gratis, Montagewerkzeug gratis bei der Erstbestellung
- Fragen zur Grösse: shop@happystrapy.com oder +41 44 211 36 26
